This page is part of © FOTW Flags Of The World website

Trinidad and Tobago - Ensigns

Last modified: 2003-04-26 by dov gutterman
Keywords: trinidad | tobago | trinidad and tobago |
Links: FOTW homepage | search | disclaimer and copyright | write us | mirrors




See also:


Civil and State ensign


by Zeljko Heimer, 6 April 2003

The civil ensign of Trinidad and Tobago is the same as the national flag, but in the proportions of 1:2.
Jan Zrzavy, 16 January 1998

According to Album 2000 [pay00] - Civil and State Ensign (---/CS- 1:2) - Red flag with a black falling diagonal fimbriated white. The design for the ensign is in longer ratio, 1:2.
Zeljko Heimer, 6 April 2003

Construction Sheet


by Zeljko Heimer, 6 April 2003

Specification still give the bend width 1/5 of the length further divided 1-4-1.
Zeljko Heimer, 6 April 2003


Naval (Coast Guard) ensign

[Trinidad and Tobago naval ensign]
by Zeljko Heimer, 6 April 2003

This ensign appears as Trinidad and Tobago coast guard flag at <www.ttdf.mil.tt>.
Dov Gutterman , 16 May 2000

According to Album 2000 [pay00] - Coast Guard Ensign (---/-S- 1:2) - White flag with red cross thoughout and the national flag in the canton fimbriated white. I.e. it is a white ensign, and therefore the width of the crossbars is 1/6 of the hoist, no doubt. I have no data if the fimbriatioon size of the canton is prescribed, probably not, and I give it about 1/2 of the white fimbriation in the national flag in canton. Maybe I was wrong as in the second look it seems that both Album and Smith give the two white fimbriations of the same width. Of course, the width of the bend is still 1/5 of the length of the canton, 1-4-1.
Zeljko Heimer, 6 April 2003